Company | Headquarters | Distributors | News | Infos | E-business | Catalogues | Home |

 

Debem industrial pumps

F-0850-2 Fixed mixer with internal stand and locking device for fitting to an open or partially-covered tank. Designed for the water treatment sector, irrigation, etc. These mixers can handle products with a maximum density of 40°Bé and viscosity not exceeding 1.500 cps at atmospheric pressure.  Usable in cylindrical drums of a max. 1000 litres capacity. Construction materials Aisi 316 Motor 220/380 220 S.ph. Lenght column/shaft 850 C.V./HP 0,33 RPM 940 Ø impeller mm 120 impeller in Aisi 316 Coated shaft Aisi 316

F-1000-2 Fixed mixer with internal stand and locking device for fitting to an open or partially-covered tank. Designed for the water treatment sector, irrigation, etc. These mixers can handle products with a maximum density of 40°Bé and viscosity not exceeding 1.500 cps at atmospheric pressure.  Usable in cylindrical drums of a max. 1000 litres capacity. Construction materials Aisi 316 Motor 220/380 220 S.ph. Lenght column/shaft 1000 C.V./HP 0,33 RPM 940 Ø impeller mm 120 impeller in Aisi 316 Coated shaft Aisi 316

F-1200-2

F-85 S-35 Fixed mixer with internal stand and locking device for fitting to an open or partially-covered tank. Designed for the water treatment sector, irrigation, etc. These mixers can handle products with a maximum density of 40°Bé and viscosity not exceeding 1.500 cps at atmospheric pressure.  Usable in cylindrical drums of a max. 1000 litres capacity. Construction materials Aisi 316 Motor 220/380 220 S.ph. Lenght column/shaft 850 C.V./HP 0,33 RPM 940 Ø impeller mm 120 impeller in Aisi 316 Coated shaft Aisi 316

F-10 S-35 Fixed mixer with internal stand and locking device for fitting to an open or partially-covered tank. Designed for the water treatment sector, irrigation, etc. These mixers can handle products with a maximum density of 40°Bé and viscosity not exceeding 1.500 cps at atmospheric pressure.  Usable in cylindrical drums of a max. 1000 litres capacity. Construction materials Aisi 316 Motor 220/380 220 S.ph. Lenght column/shaft 1000 C.V./HP 0,33 RPM 940 Ø impeller mm 120 impeller in Aisi 316 Coated shaft Aisi 316

F-10 S-90 Fixed mixer with internal stand and locking device for fitting to an open or partially-covered tank. Designed for the water treatment sector, irrigation, etc. These mixers can handle products with a maximum density of 40°Bé and viscosity not exceeding 1.500 cps at atmospheric pressure.  Usable in cylindrical drums of a max. 1000 litres capacity. Construction materials Aisi 316 Motor 220/380 220 S.ph. Lenght column/shaft 1000 C.V./HP 0,33 RPM 940 Ø impeller mm 120 impeller in Aisi 316 Coated shaft Aisi 316

F-12 S-35 Fixed mixer with internal stand and locking device for fitting to an open or partially-covered tank. Designed for the water treatment sector, irrigation, etc. These mixers can handle products with a maximum density of 40°Bé and viscosity not exceeding 1.500 cps at atmospheric pressure.  Usable in cylindrical drums of a max. 1000 litres capacity. Construction materials Aisi 316 Motor 220/380 220 S.ph. Lenght column/shaft 1200 C.V./HP 0,33 RPM 940 Ø impeller mm 120 impeller in Aisi 316 Coated shaft Aisi 316

F-15 S-90 Fixed mixer with internal stand and locking device for fitting to an open or partially-covered tank. Designed for the water treatment sector, irrigation, etc. These mixers can handle products with a maximum density of 40°Bé and viscosity not exceeding 1.500 cps at atmospheric pressure.  Usable in cylindrical drums of a max. 3000 litres capacity. Construction materials Aisi 316 Motor 220/380 220 S.ph. Lenght column/shaft 1000 C.V./HP 0,75 RPM 940 Ø impeller mm 160 impeller in Aisi 316 Coated shaft Aisi 316

H-10 S-35 Fixed mixer with internal stand and locking device for fitting to an open or partially-covered tank. Designed for the water treatment sector, irrigation, etc. These mixers can handle products with a maximum density of 40°Bé and viscosity not exceeding 1.500 cps at atmospheric pressure.  Usable in cylindrical drums of a max. 3000 litres capacity. Construction materials Aisi 316 Motor 220/380 220 S.ph. Lenght column/shaft 1000 C.V./HP 0,75 RPM 940 Ø impeller mm 160 impeller in Aisi 316 Coated shaft Aisi 316

H-10 S-90 Fixed mixer with internal stand and locking device for fitting to an open or partially-covered tank. Designed for the water treatment sector, irrigation, etc. These mixers can handle products with a maximum density of 40°Bé and viscosity not exceeding 1.500 cps at atmospheric pressure.  Usable in cylindrical drums of a max. 3000 litres capacity. Construction materials Aisi 316 Motor 220/380 220 S.ph. Lenght column/shaft 1000 C.V./HP 0,75 RPM 940 Ø impeller mm 160 impeller in Aisi 316 Coated shaft Aisi 316

H-12 S-35 Fixed mixer with internal stand and locking device for fitting to an open or partially-covered tank. Designed for the water treatment sector, irrigation, etc. These mixers can handle products with a maximum density of 40°Bé and viscosity not exceeding 1.500 cps at atmospheric pressure.  Usable in cylindrical drums of a max. 3000 litres capacity. Construction materials Aisi 316 Motor 220/380 220 S.ph. Lenght column/shaft 1200 C.V./HP 0,75 RPM 940 Ø impeller mm 160 impeller in Aisi 316 Coated shaft Aisi 316

H-12 S-110 Fixed mixer with internal stand and locking device for fitting to an open or partially-covered tank. Designed for the water treatment sector, irrigation, etc. These mixers can handle products with a maximum density of 40°Bé and viscosity not exceeding 1.500 cps at atmospheric pressure.  Usable in cylindrical drums of a max. 3000 litres capacity. Construction materials Aisi 316 Motor 220/380 220 S.ph. Lenght column/shaft 1200 C.V./HP 0,75 RPM 940 Ø impeller mm 160 impeller in Aisi 316 Coated shaft Aisi 316

H-15 S-90 Fixed mixer with internal stand and locking device for fitting to an open or partially-covered tank. Designed for the water treatment sector, irrigation, etc. These mixers can handle products with a maximum density of 40°Bé and viscosity not exceeding 1.500 cps at atmospheric pressure.  Usable in cylindrical drums of a max. 3000 litres capacity. Construction materials Aisi 316 Motor 220/380 220 S.ph. Lenght column/shaft 1500 C.V./HP 0,75 RPM 940 Ø impeller mm 160 impeller in Aisi 316 Coated shaft Aisi 316

H-15 S-140 Fixed mixer with internal stand and locking device for fitting to an open or partially-covered tank. Designed for the water treatment sector, irrigation, etc. These mixers can handle products with a maximum density of 40°Bé and viscosity not exceeding 1.500 cps at atmospheric pressure.  Usable in cylindrical drums of a max. 3000 litres capacity. Construction materials Aisi 316 Motor 220/380 220 S.ph. Lenght column/shaft 1500 C.V./HP 0,75 RPM 940 Ø impeller mm 160 impeller in Aisi 316 Coated shaft Aisi 316

H-18 S-170 Fixed mixer with internal stand and locking device for fitting to an open or partially-covered tank. Designed for the water treatment sector, irrigation, etc. These mixers can handle products with a maximum density of 40°Bé and viscosity not exceeding 1.500 cps at atmospheric pressure.  Usable in cylindrical drums of a max. 3000 litres capacity. Construction materials Aisi 316 Motor 220/380 220 S.ph. Lenght column/shaft 1800 C.V./HP 0,75 RPM 940 Ø impeller mm 160 impeller in Aisi 316 Coated shaft Aisi 316

H-20 S-190 Fixed mixer with internal stand and locking device for fitting to an open or partially-covered tank. Designed for the water treatment sector, irrigation, etc. These mixers can handle products with a maximum density of 40°Bé and viscosity not exceeding 1.500 cps at atmospheric pressure.  Usable in cylindrical drums of a max. 3000 litres capacity. Construction materials Aisi 316 Motor 220/380 220 S.ph. Lenght column/shaft 2000 C.V./HP 0,75 RPM 940 Ø impeller mm 160 impeller in Aisi 316 Coated shaft Aisi 316

J-12 S-110 Fixed mixer with internal stand and locking device for fitting to an open or partially-covered tank. Designed for the water treatment sector, irrigation, etc. These mixers can handle products with a maximum density of 40°Bé and viscosity not exceeding 1.500 cps at atmospheric pressure.  Usable in cylindrical drums of a max. 5000 litres capacity. Construction materials Aisi 316 Motor 220/380 220 S.ph. Lenght column/shaft 1200 C.V./HP 1,5 RPM 940 Ø impeller mm 200 impeller in Aisi 316 Coated shaft Aisi 316

J-15 S-140 Fixed mixer with internal stand and locking device for fitting to an open or partially-covered tank. Designed for the water treatment sector, irrigation, etc. These mixers can handle products with a maximum density of 40°Bé and viscosity not exceeding 1.500 cps at atmospheric pressure.  Usable in cylindrical drums of a max. 5000 litres capacity. Construction materials Aisi 316 Motor 220/380 220 S.ph. Lenght column/shaft 1500 C.V./HP 1,5 RPM 940 Ø impeller mm 200 impeller in Aisi 316 Coated shaft Aisi 316

J-18 S-170 Fixed mixer with internal stand and locking device for fitting to an open or partially-covered tank. Designed for the water treatment sector, irrigation, etc. These mixers can handle products with a maximum density of 40°Bé and viscosity not exceeding 1.500 cps at atmospheric pressure.  Usable in cylindrical drums of a max. 5000 litres capacity. Construction materials Aisi 316 Motor 220/380 220 S.ph. Lenght column/shaft 1800 C.V./HP 1,5 RPM 940 Ø impeller mm 200 impeller in Aisi 316 Coated shaft Aisi 316

J-20 S-190 Fixed mixer with internal stand and locking device for fitting to an open or partially-covered tank. Designed for the water treatment sector, irrigation, etc. These mixers can handle products with a maximum density of 40°Bé and viscosity not exceeding 1.500 cps at atmospheric pressure.  Usable in cylindrical drums of a max. 5000 litres capacity. Construction materials Aisi 316 Motor 220/380 220 S.ph. Lenght column/shaft 2000 C.V./HP 1,5 RPM 940 Ø impeller mm 200 impeller in Aisi 316 Coated shaft Aisi 316

E-600-4 PP and PVDF mixers for processing acids. No stand with locking device for tank installation. Watertight, this being achieved by means of a fixed ceramic part and V-ring seal in the top section and an O-ring fitted to the bolt-on impeller. Series E L. 600/800 mm usable in cylindrical drums of a max. 400 litres capacity. Series E L. 1000/1200 mm usable in cylindrical drums of a max. 1000 litres capacity. Series EH usable in cylindrical drums of a max. 3000 litres capacity. Construction materials PP/PVDF Motor 220 S.ph. 220/380 Lenght column/shaft 600 C.V./HP 1/6 RPM 940 impeller in PP, PVDF Coated shaft PP, PVDF

E-800-4 PP and PVDF mixers for processing acids. No stand with locking device for tank installation. Watertight, this being achieved by means of a fixed ceramic part and V-ring seal in the top section and an O-ring fitted to the bolt-on impeller. Series E L. 600/800 mm usable in cylindrical drums of a max. 400 litres capacity. Series E L. 1000/1200 mm usable in cylindrical drums of a max. 1000 litres capacity. Series EH usable in cylindrical drums of a max. 3000 litres capacity. Construction materials PP/PVDF Motor 220 S.ph. 220/380 Lenght column/shaft 800 C.V./HP 1/6 RPM 940 impeller in PP, PVDF Coated shaft PP, PVDF

E-1000-4 PP and PVDF mixers for processing acids. No stand with locking device for tank installation. Watertight, this being achieved by means of a fixed ceramic part and V-ring seal in the top section and an O-ring fitted to the bolt-on impeller. Series E L. 600/800 mm usable in cylindrical drums of a max. 400 litres capacity. Series E L. 1000/1200 mm usable in cylindrical drums of a max. 1000 litres capacity. Series EH usable in cylindrical drums of a max. 3000 litres capacity. Construction materials PP/PVDF Motor 220 S.ph. 220/380 Lenght column/shaft 1000 C.V./HP 1/3 RPM 940 impeller in PP, PVDF Coated shaft PP, PVDF

E-1200-4 PP and PVDF mixers for processing acids. No stand with locking device for tank installation. Watertight, this being achieved by means of a fixed ceramic part and V-ring seal in the top section and an O-ring fitted to the bolt-on impeller. Series E L. 600/800 mm usable in cylindrical drums of a max. 400 litres capacity. Series E L. 1000/1200 mm usable in cylindrical drums of a max. 1000 litres capacity. Series EH usable in cylindrical drums of a max. 3000 litres capacity. Construction materials PP/PVDF Motor 220 S.ph. 220/380 Lenght column/shaft 1200 C.V./HP 3/4 RPM 940 impeller in PP, PVDF Coated shaft PP, PVDF

EH-1400-4 PP and PVDF mixers for processing acids. No stand with locking device for tank installation. Watertight, this being achieved by means of a fixed ceramic part and V-ring seal in the top section and an O-ring fitted to the bolt-on impeller. Series E L. 600/800 mm usable in cylindrical drums of a max. 400 litres capacity. Series E L. 1000/1200 mm usable in cylindrical drums of a max. 1000 litres capacity. Series EH usable in cylindrical drums of a max. 3000 litres capacity. Construction materials PP/PVDF Motor 220 S.ph. 220/380 Lenght column/shaft 1400 C.V./HP 3/4 RPM 940 impeller in PP, PVDF Coated shaft PP, PVDF

FR-1000-12 Fixed mixer without stand for installation above open or partially-covered vessels. 2- or 3-stage reduction gearbox for slower rotation speeds. For a very slow mixing of fluids (e.g.: non foaming fluids). It is utilized for very small drums. Construction materials Aisi 316 Motor 220 S.ph. 220/380 Lenght column/shaft 1000 C.V./HP 1/8 RPM 118 Ø impeller mm 160 impeller in Aisi 316 Coated shaft Aisi 316

FR-1200-12 Fixed mixer without stand for installation above open or partially-covered vessels. 2- or 3-stage reduction gearbox for slower rotation speeds. For a very slow mixing of fluids (e.g.: non foaming fluids). It is utilized for very small drums. Construction materials Aisi 316 Motor 220 S.ph. 220/380 Lenght column/shaft 1200 C.V./HP 1/8 RPM 118 Ø impeller mm 200 impeller in Aisi 316 Coated shaft Aisi 316

FR-1000-86 Fixed mixer without stand for installation above open or partially-covered vessels. 2- or 3-stage reduction gearbox for slower rotation speeds. For a very slow mixing of fluids (e.g.: non foaming fluids). It is utilized for very small drums. Construction materials Aisi 316 Motor 220 S.ph. 220/380 Lenght column/shaft 1000 C.V./HP 1/8 RPM 86 Ø impeller mm 200 impeller in Aisi 316 Coated shaft Aisi 316

FR-1200-86 Fixed mixer without stand for installation above open or partially-covered vessels. 2- or 3-stage reduction gearbox for slower rotation speeds. For a very slow mixing of fluids (e.g.: non foaming fluids). It is utilized for very small drums. Construction materials Aisi 316 Motor 220 S.ph. 220/380 Lenght column/shaft 1200 C.V./HP 1/8 RPM 86 Ø impeller mm 200 impeller in Aisi 316 Coated shaft Aisi 316

FR-1000-35 Fixed mixer without stand for installation above open or partially-covered vessels. 2- or 3-stage reduction gearbox for slower rotation speeds. For a very slow mixing of fluids (e.g.: non foaming fluids). It is utilized for very small drums. Construction materials Aisi 316 Motor 220/380 Lenght column/shaft 1000 C.V./HP 1/8 RPM 35 Ø impeller mm 600 impeller in Aisi 316 Coated shaft Aisi 316

FR-1200-35 Fixed mixer without stand for installation above open or partially-covered vessels. 2- or 3-stage reduction gearbox for slower rotation speeds. For a very slow mixing of fluids (e.g.: non foaming fluids). It is utilized for very small drums. Construction materials Aisi 316 Motor 220/380 Lenght column/shaft 1200 C.V./HP 1/8 RPM 35 Ø impeller mm 600 impeller in Aisi 316 Coated shaft Aisi 316

FR-1000-12PP Fixed mixer without stand for installation above open or partially-covered vessels. 2- or 3-stage reduction gearbox for slower rotation speeds. For a very slow mixing of fluids (e.g.: non foaming fluids). It is utilized for very small drums. Construction materials PP Motor 220 S.ph. 220/380 Lenght column/shaft 1000 C.V./HP 1/8 RPM 118 Ø impeller mm 160 impeller in PP Coated shaft PP

FR-1200-12PP Fixed mixer without stand for installation above open or partially-covered vessels. 2- or 3-stage reduction gearbox for slower rotation speeds. For a very slow mixing of fluids (e.g.: non foaming fluids). It is utilized for very small drums. Construction materials PP Motor 220 S.ph. 220/380 Lenght column/shaft 1200 C.V./HP 1/8 RPM 118 Ø impeller mm 160 impeller in PP Coated shaft PP

DEBEM

BOXER: Air-operated double diaphragm pumps

CUBIC: air-operated diaphragm minipumps

FOODBOXER: food-processing diaphragm pumps FDA

MB: horizontal centrifugal pumps

DM: magnetic drive centrifugal pumps

IM: vertical centrifugal pumps

TR: drum transfer pumps

Mixers: plastic and metal

Peristaltic pumps: with pipe N/NA/TY/Ph

EQUAFLUX: automatic pulsation dampeners

DUALFLUX: flow reversers

Strainers: pump-protecting basket strainers

Accessories: and other pumps

Cubic: double diaphragm pumps

Cubic: double diaphragm pumps

Boxer: air-operated double-diaphragm pumps

Boxer: air-operated double-diaphragm pumps

MB: horizontal centrifugal pumps

MB: horizontal centrifugal pumps

IM: vertical centrifugal pumps

IM: vertical centrifugal pumps

TR: drum transfer pumps

TR: drum transfer pumps

EQUAFLUX: Automatic pulsation dampeners

EQUAFLUX: Automatic pulsation dampeners

send us an email info@tecnicaindustriale.it send us a fax   +39 0805367091 call us    +39 080.5367090

Tecnica Industriale Srl S.P. 231 Km 1,110 – 70026 Modugno (Ba) - Italy Tel +39 0805367090 - Fax +39 0805367091 E-mail: info@tecnicaindustriale.it

2009 - Tecnica Industriale Srl - all rights reserved - created by www.omnilink.it