Company | Headquarters | Distributors | News | Infos | E-business | Catalogues | Home |

 

SAER ELECTRIC PUMPS

SAER WATERPUMPS RESIDENTIAL APPLICATIONS  KF PERIPHERAL

APPLICATIONS General water supply, pressurized water using pressure vessels (autoclaves), horticultural irrigation, mist irrigation, boosting showers, dairy and farm applications, garden watering applications, to empty and fill cisterns for clean liquids only. CHARACTERISTICS Pump body and motor support in cast iron, pressed brass impeller. Mechanical seal in carbon/ceramic, rotor shaft in stainless steel with seal for life bearings. Totally enclosed fan cooled motor (TEFC). Single phase motors with a built in thermal overload protection on request, the capacitor is permanently in circuit. Motor protection to IP44. Winding insulation to class B (for motors of size 63), F (for other sizes. Standard voltage: 230V- 50Hz single phase, 230V/400V- 50Hz three phase. Other voltages and frequencies available upon request. SPECIFICATIONS - Capacities up to 4.2 m3 / hr - Heads up to 88 meters - Liquid quality requirement is clean and free from solids or abrasive substances and non aggressive - Maximum temperature of pumped liquid - 15°C to +70°C - Maximum ambient temperature 40°C. For higher temperatures please contact the sales office. Maximum working pressure 9 bar. The tolerances of the hydraulic features are according to UNI / ISO 2548-Class C Appendix B electric features according to C.E.I. The working features listed in the catalogue are based on continuos service for clear water with a specific weight of 1000 kg/m3. Manometric suction lift of 8 meters with a foot valve fitted, for a suction lift of above 5 meters it is advisable to install the suction pipe with a internal diameter larger than the pump inlet.

SAER WATERPUMPS RESIDENTIAL APPLICATIONS CM-CMP ELECTRIC SINGLE IMPELLER CENTRIFUGAL PUMPS

APPLICATIONS Industrial water supply, pressurized water using pressure vessels (autoclaves), horticultural and agricultural irrigation, civil and domestic water transfer applications. CHARACTERISTICS Pump body and motor support in cast iron or cast aluminum alloy. Pressed brass impeller or thermoplastic resin. Mechanical seal in carbon/ceramic. Rotor shaft fitted with seal for life bearings. Totally enclosed fan cooled motor (TEFC). Single phase motors with a built in thermal overload protection on request, the capacitor is permanently in circuit. Motor protection to IP44 (available in IP55 upon request). Winding Insulation to class B (for motors of size 63), F (for other sizes). Standard Voltage: 230V-50Hz sinqle phase, 230/400V- 50Hz three phase. Other voltages and frequencies available upon request. SPECIFICATIONS Capacities up to 8 m3/hr Heads up to 59 meters Liquid quality required clean, free from solids or abrasive substances and chemically non aqgressive. Maximum Temperature of pumped liquid -15°C to +70°C Maximum ambient temperature 40°C. For higher temperatures please contact the sales office. Maximum working pressure 9 bar. The tolerances of the hydraulic features are according to UNI / ISO 2548-Class C, Appendix B, electric features according to C.E.I. The working features listed in the catalogue are based on continuos service for clear water with a specific weight of 1000 kg /m3. Manometric suction lift of 8 meters with a foot valve, for a suction lift of above 5 meters it is advisable to install the suction pipe with a internal diameter larger than the pump inlet.

SAER WATERPUMPS RESIDENTIAL APPLICATIONS BP-CMK ELECTRIC SINGLE IMPELLER CENTRIFUGAL PUMPS

APPLICATIONS Industrial water supply, pressurized water using pressure vessels (autoclaves), various horticultural and agricultural irrigation applications, civil and domestic water transfer schemes. The open impeller design allows the pump to handle slightly dirty water. CHARACTERISTICS Pump body and motor support in cast iron. Impeller pressed brass on BP 3- 4 - 5 - 6. Impeller cast iron on CMK - BP 7 - 8. Mechanical seal in graphite/ceramic. Rotor shaft fitted with seal for life bearings. Totally enclosed fan cooled motor (TEFC). Single phase motors with a built in thermal overload protection on request, the capacitor is permanently in circuit. Motor protection to IP44 (available in IP55 upon request). Winding Insulation to class F. Standard Voltage: 230V-50Hz single phase 230V/400V - 50Hz three phase. Other voltages and frequencies available upon request. SPECIFICATIONS - Capacities up to 120 m3/hr - Heads up to 24 meters - Liquid quality required clean or slightly dirty water, chemically non aggressive. - Maximum Temperature of pumped liquid -15°C to +70°C - Maximum ambient temperature 40°C. For higher temperatures please contact the sales office. Maximum working pressure 6 bar. The tolerances of the hydraulic features are according to UNI / ISO 2548-Class C, Appendix B, electric features according to C.E.I. The working features listed in the catalogue are based on continuous service for clear water with a specific weight of 1000 kg/m3. Manometric suction lift of 8 meters with a foot valve, for a suction lift of above 5 meters it is advisable to install the suction pipe with a internal diameter larger than the pump inlet.

SAER WATERPUMPS RESIDENTIAL APPLICATIONS  FC ELECTRIC CENTRIFUGAL PUMPS WITH TWO OPPOSITE IMPELLERS

APPLICATIONS Industrial water supply, pressurized water using pressure vessels (autoclaves), various horticultural and agricultural irrigation applications, civil and domestic water transfer schemes, boiler and chiller and refrigeration systems. CHARACTERISTICS Pump suction, discharge body, also motor support in cast iron. Impeller pressed brass. Mechanical seal in carbon/ceramic. Rotor shaft in steel fitted with seal for life bearings. Totally enclosed fan cooled motor (TEFC). Single phase motors with a built in thermal overload protection on request, the capacitor is permanently in circuit. Motor protection to IP44 (available in IP55 upon request). Winding Insulation to class F. Standard Voltage: 230V-50Hz single phase 230V/400V-50Hz three phase up to = 4 kW, 400V/690V-50Hz for powers > 4 kW. Other voltages and frequencies available upon request. SPECIFICATIONS - Capacities up to 18 m3/hr - Heads up to 96 meters - Liquid quality required clean free from solids or abrasive substances chemically non aggressive. - Maximum Temperature of pumped liquid -15°C to +70°C - Maximum ambient temperature 40°C. For higher temperatures please contact the sales office. - Maximum working pressure 10 bar. The tolerances of the hydraulic features are according toUNI / ISO 2548-Class C, Appendix B, electric features according to C.E.I. The working features listed in the catalogue are based on continuous service for clear water with a specific weight of 1000 kg/m3. Manometric suction lift of 8 meters with a foot valve, for a suction of above 5 meters it is advisable to install the suction pipe with the internal diameter larger than the pump inlet.

SAER WATERPUMPS RESIDENTIAL APPLICATIONS   CB MULTI-STAGES

APPLICATIONS - For mechanically and chemically non-aggressive fluids. - Water supply. - Household systems. - Automatic distribution of water with small or medium tanks (autoclaves) for irrigation. - Pressure increases in water mains. CHARACTERISTICS Pump body and motor support in cast iron. Pressed brass impellers or thermoplastic resin. Thermoplastic resin diffusers. Rotor shaft in stainless steel AISI 431. Mechanical seal in carbon/ceramic. Asynchronous electric cage motor closed in an aluminium case and externally ventilated. Protection level: IP 44. Insulation class: F Standard voltage 230-400V / 50Hz SPECIFICATIONS Capacities of flow up to 15 m3/h Heads up to 85 m. Temperature of pumped liquid -15°C -70°C Maximum working pressure: 10 bar Maximum ambient temperature: 40 °C (contact our technical department for higher temperatures). Manometric suction lift: 8m. Tolerance of hydraulic specifications. UNI/ISO 2548 class C appendix B.

SAER WATERPUMPS RESIDENTIAL APPLICATIONS M94-97-99 ELETRIC SELF PRIMINGPUMPS "Jet" (with built-in ejector)

APPLICATIONS General water supply, pressurization of water by using pressure vessels (autoclaves), horticultural irrigation, mist irrigation, dairy and farm applications, water transfer and garden watering applications. Note, it is generally advisable to fit either a non-return valve or foot-valve to the suction. CHARACTERISTICS Pump body in AISI 304 stainless steel, motor support in die cast aluminum. Impeller/diffuser in thermoplastic resin, on request in s/s, seal retaining disc in AISI 304 stainless steel. Mechanical seal in graphite/ceramic. Rotor shaft in stainless steel fitted with seal for life bearings. Totally enclosed fan cooled motor (TEFC). Single phase motors with a built in thermal overload protection on request, the capacitor is permanently in circuit. Motor protection to IP44 (available in IP55 upon Request). Winding Insulation to class F. Standard Voltage: 230V-50Hz single phase, 230V/400V-50Hz three phase. Other voltages and frequencies available upon request. SPECIFICATIONS - Capacities up to 3.6 m3/hr - Heads up to 48 meters. - Liquid quality required: clean free from solids or abrasive substances and non aggressive - Maximum Temperature of pumped liquid -15°C to 50°C - Maximum ambient temperature 40°C For higher temperatures please contact the sales office - Maximum working pressure 6 bar The tolerances of the hydraulic features are according to UNI / ISO 2548 - Class C, Appendix B, electric features according to C.E.I. The working features listed in the catalogue are based on continuous service for clear water with a specific weight of 1000kg / m3. Manometric suction lift up to a max. of 8÷9 meters.

SAER WATERPUMPS RESIDENTIAL APPLICATIONS  M50-60-70-80-300-400 ELETRIC SELF PRIMINGPUMPS "Jet" (with built-in ejector)

APPLICATIONS General water supply, pressurization of water by using pressure vessels (autoclaves) horticultural irrigation, mist irrigation, dairy, farm also industrial applications. Water transfer and garden watering applications. Note, it is generally advisable to fit either a non-return valve or foot-valve to the suction. CHARACTERISTICS Pump body in cast iron. Pressed brass impeller, or in thermoplastic resin. Diffuser in thermoplastic resin. Mechanical seal in carbon/ceramic. Rotor shaft in steel fitted with seal for life bearings. Totally enclosed fan cooled motor (TEFC) Single phase motors with a built in thermal overload protection on request, the capacitor is permanently in circuit. Motor protection to IP44 (available in IP55 upon request). Winding Insulation to class F. Standard Voltage: 230V-50Hz single phase 230V/400V-50Hz three phase. Other voltages and frequencies available upon request. SPECIFICATIONS - Capacities up to 10 m3/h - Heads up to 69 meters - Liquid quality required; clean free from solids or abrasive substances and non oggressive - Maximum Temperature of pumped liquid -15°C to 50°C - Maximum ambient temperature 40°C. For higher temperatures please contact sales office. - Maximum working pressure 8 bar. The tolerances of the hydraulic features are according to UNI / ISO 2548 - C1ass C, Appendix B, electric features according to C.E.I. The working features listed in the catalogue are based on continuous service for clear water with a specific weight of 1000kg/m3. Manometric suction lift up to of 8÷9 meters, for a suction lift of above 5 meters it is advisable to install the suction pipe with a internal diameter larger than the pump inlet.

SAER WATERPUMPS RESIDENTIAL APPLICATIONS   M150-200 ELETRIC SELF PRIMINGPUMPS "Jet" (with built-in ejector)

APPLICATIONS General water supply, pressurization of water by using pressure vessels (autoclaves) horticultural irrigation, mist irrigation, dairy, farm also industrial applications. Water transfer and garden watering applications. Note, it is generally advisable to fit either a non-return valve or foot-valve to the suction. CHARACTERISTICS Pump body in cast iron Impeller in thermoplastic resin, on request in brass. Diffuser in thermoplastic resin. Mechanical seal in carbon/ceramic. Rotor shaft in steel fitted with seal for life bearings. Totally enclosed fan cooled motor (TEFC). Single phase motors with a built in thermal overload protection on request, the capacitor is permanently in circuit. Motor protection to IP44 (available in IP55 upon request). Winding Insulation to class F. Standard Voltage: 230V-50Hz single phase. 230V/400V-50Hz three phase. Other voltages and frequencies available upon reque. SPECIFICATIONS - Capacities up to 6 m3/h - Heads up to 68 meters - Liquid quality required; clean free from solids or abrasive substances and non oggressive - Maximum Temperature of pumped liquid -15°C to 50°C - Maximum ambient temperature 40°C. For higher temperatures please contact sales office. - Maximum working pressure 8 bar. The tolerances of the hydraulic features are according to UNI / ISO 2548 - Class C, Appendix B, electric features according to C.E.I. The working features listed in the catalogue are based on continuous service for clear water with a specific weight of 1000kg/m3. Manometric suction lift up to of 8÷9 meters, for a suction lift of above 5 meters it is advisable to install the suction pipe with a internal diameter larger than the pump inlet.

SAER WATERPUMPS RESIDENTIAL APPLICATIONS  M90-100-153-203 ELETRIC SELF PRIMINGPUMPS "Jet"(with external ejector for deep well Ø4")'

APPLICATIONS Water supply to remote dwellings i.e. farmhouses, general water supply, pressurized water using pressure vessels (autoclaves), horticultural irrigation, mist irrigation, dairy, farm also industrial applications. Water transfer and garden watering applications. Note, a foot-valve must be fitted to the ejector, also with a valve mounted on the outlet of the pump to ensure a suitable counter pressure during operation. The pipes connecting the ejector and the pump body must always be filled up before starting. CHARACTERISTICS Pump body, pump support and ejector in cast iron. Pressed brass impeller M90 - M100, on request thermoplastic resin on the M103 - M203 models. Diffuser in thermoplastic resin. Mechanical seal in carbon ceramic. Rotor shaft in steel fitted with seal for life bearings Totally enclosed fan cooled motor (TEFC) Single phase motors with a built in thermal overload protection on request, the capacitor is permanently in circuit. Motor protection to IP44 (available in IP55 upon request). Winding Insulation to class F. Standard Voltage: 230V-50Hz single phase 230V/400V-50Hz three phase. Other voltages and frequencies available upon request. SPECIFICATIONS - Capacities up to 2 m3/hr for M90 - M100 - Capacities up to 4 m3/hr for M153 - M203 - Heads up to 56 meters for M90 - M100 - Heads up to 110 meters for M153 - M203 - Liquid quality required: clean free from solids or abrasive substances and chemically non aggressive - Maximum Temperature of pumped liquid -15°C to 50°C - Maximum ambient temperature 40 C. For higher temperatures please contact the sales office. - Maximum working pressure 11 bar. The tolerances of the hydraulic features are according to UNI/ISO 2548-Class C, Appendix B, motors according to C.E.I. The working features listed in the catalogue are based on continuous service: for clear water with a specific weight of 1000 kg/m3.

WATERPUMPS RESIDENTIAL APPLICATIONS  M92-102-202 ELETRIC SELF PRIMINGPUMPS  "Jet" (with external ejector for deep well Ø2")'

APPLICATIONS Water supply to remote dwellings i.e. farmhouses, general water supply, pressurized water using pressure vessels (autoclaves), horticultural irrigation, mist irrigation, dairy, farm also industrial applications. Water transfer and garden watering applications. Note, a foot-valve must be fitted to the ejector also with a valve mounted on the outlet of the pump to ensure a suitable counter pressure during operation. The pipes connecting the ejector and the pump body must always be filled up before starting. CHARACTERISTICS Pump body, pump support and ejector in cast iron. Pressed Brass Impeller M92 - M102 models, on request thermoplastic resin on the M202 model. Diffuser in Thermoplastic resin. Mechanical seal in carbon ceramic. Rotor shaft in steel fitted with seal bearings. Totally enclosed fan cooled motor (TEFC). Single phase motors with a built in thermal overload protection on request, the capacitor is permanently in circuit. Motor protection to IP44 (available in IP55 upon Request). Winding Insulation to class F. Standard Voltage: 230V-50hz single phase 230V/400V-50Hz three phase. Other voltages and frequencies available upon request. SPECIFICATIONS - Capacities up to 1.7 m3/hr for M92 - M102 - Capacities up to 3 m3/hr for M202 - Heads up to 42 meters for M92 - M102 - Heads up to 83 meters for M202 - Liquid quality required: clean free from solids or abrasive substances and chemically non aggressive - Maximum Temperature of pumped liquid -15°C to 50°C - Maximum ambient temperature 40°C. For higher temperatures please contact the sales office. - Maximum working pressure 9 bar. The tolerances of the hydraulic features are according to UNI / ISO 2548-Class C, Appendix B, motors according to C.E.I. The working features listed in the catalogue are based on continuous service for clear water with a specific weight of 1000kg /m3.

SAER WATERPUMPS RESIDENTIAL APPLICATIONS AP97 ELETRIC SELF PRIMINGPUMPS (with open impeller)

APPLICATIONS General water supply from rivers, streams, dirty water distribution, agricultural applications, building sites, dirty water disposal. The open impeller design allows water with a solid content to pass easily, whether sandy, muddy or particle laden. CHARACTERISTICS Pump body, impeller, pump support and inlet in cast iron. Non return valve in nitrile rubber and steel. Impeller cast iron. Mechanical seal in carbon ceramic (upon request tungsten/carbide). Rotor shaft in stainless steel fitted with seal bearings. Totally enclosed fan cooled motor (TEFC). Single phase motors with a built in thermal overload protection on request, the capacitor is permanently in circuit. Motor protection to IP44 (available in IP55 upon request). Winding Insulation to class F. Standard Voltage: 230V-5OHz single phase 230V/400V-50 Hz three phase. Other voltages and frequencies available upon request. SPECIFICATIONS - Capacities up to 30 m3/hr - Heads up to 16,5 meters - Maximum Temperature of pumped liquid -15°C to 70°C - Maximum ambient temperature 40°C - For higher temperatures please contact the sales office Maximum working pressure 6 bar The tolerances of the hydraulic features are according to UNI/ISO 2548-Class C, Appendix B, motors according to C.E.I. The working features listed in the catalogue are based on continuous service for clear water with a specific weight of 1000kg/m3. Manometric suction lift of 8 meters maximum.

SAER WATERPUMPS RESIDENTIAL APPLICATIONS AS97 CENTRIFUGAL SELF PRIMING MOTOR PUMPS (with open impeller)

APPLICATIONS General water supply from rivers, streams, dirty water distribution, agricultural applications, building sites, dirty water disposal. The open impeller design allows water with a solid content to pass easily, whether sandy, muddy or particle laden. CHARACTERISTICS Pump body, impeller, pump support and inlet in cast iron. Non return valve in nitrile rubber and steel. Impeller cast iron. Mechanical seal in carbon/ceramic (upon request tungsten/carbide). Special versions on request. SPECIFICATIONS - Capacities up to 36 m3/hr - Heads up to 25 meters - Maximum Temperature of pumped liquid -15°C to 70°C - Maximum ambient temperature 40°C. For higher temperatures please contact the sales office. - Maximum working pressure 6 bar. The tolerances of the hydraulic features are according to UNI/ISO 2548 - C1ass C, Appendix B. The working features listed in the catalogue are based on continuous service, for clear water with a specific weight of 1000 kg /m3. Monometric suction lift 8 meters.

SAER WATERPUMPS RESIDENTIAL APPLICATIONS CFP-CF ELECTRIC GEAR PUMPS

APPLICATIONS Varnish, thick oil, viscous liquids, glue, molasses, soaps, grease etc. NB. the liquid must be free of any solid content. CHARACTERISTICS Pump body in cast iron with lateral threaded connections, one in steel and one in bronze. Seal in with radial rings in rubber. Rotor fitted with seal for life bearings. Totally enclosed fan cooled motor (TEFC). Single phase motors with a built in thermal overload protection on request, the capacitor is permanently in circuit. Motor protection to IP44 (available in IP55 upon Request). Winding insulation to class F. Standard voltage: 230V-50Hz single phase 230V/400V-50Hz three phase. Other voltages and frequencies available upon request. SPECIFICATIONS - Capacities up to 1,2 m3/hr - Heads up to 140 meters - Maximum temperature of pumped liquid -15°C to 60°C - Maximum working pressure 14 bar - Maximum ambient temperature 40°C. For higher temperatures please contact the sales office. The tolerances of the hydraulic features are according to UNI / ISO 2548 - C1ass C, Appendix B, electric features according to C.E.I. The working features listed in the catalogue are based on continuos service for pumped liquid with a specific weight of 780 kg/m3.

Saer eletric pumps | eletric submersible pumps | waterpumps residential applications | wet-end motors | bareshaft end-suction centrifugal pumps | multistage vertical electric pumps | multistage horizontal electric pumps | electric submersible pumps

inviaci un e-mail info@tecnicaindustriale.it inviaci un fax al n.   +39 0805367091 chiamaci al n.    +39 080.5367090

Tecnica Industriale Srl S.P. 231 Km 1,110 – 70026 Modugno (Ba) - Italy Tel +39 0805367090 - Fax +39 0805367091 E-mail: info@tecnicaindustriale.it

2009 - Tecnica Industriale Srl - all rights reserved - created by www.omnilink.it