Displacement:
from 6.06 to 225.1 cm³/rev
from 0.37 to 13.73 in³/rev
Flow range:
from 47 to 360 l/min
[from 12.4 to 95 U.S. gpm]
Input speed:
up to 4300 rpm (Max)
Pressure range:
from 350 to 450 bar (Max)
[from 5075 to 6525 psi (Max)]
Max torque:
1613 Nm [1189 lbf * ft]
The H1C series pumps are bent axis, axial piston hydraulic units with fixed displacement for operation in open circuit. H1C series pumps are available in metric and SAE mounting configuration.
Catalogue and Technical Literature
Displacement:
from 54.8 to 225.1 cm³/rev
from 3.34 to 13.73 in³/rev
Flow range:
from 143 to 338 l/min
[from 37.8 to 89.2 U.S. gpm]
Input speed:
up to 3700 rpm (Max)
Pressure range:
from 350 to 450 bar (Max)
[from 5075 to 6525 psi (Max)]
Max torque:
1613 Nm [1189 lbf * ft]
H1V series are a family of variable displacement axial piston pumps, bent axis design, for operation in open circuit. The high quality components and manufacturing techniques make possible for these pumps to perform at maximum efficiency and long life. Versatile design includes a variety of controls and shaft ends that will adapt the H1V series pumps to any application both industrial and mobile. H1V series pumps are available in both metric and SAE mounting flange configuration.
Displacement:
from 11.9 to 30 cm³/rev
from 0.73 to 1.83 in³/rev
Flow range:
from 21.4 to 54 l/min
[from 5.65 to 14.6 U.S. gpm]
Input speed:
up to 1800 rpm (Max)
Pressure range:
from 250 to 320 bar (Max)
[from 3625 to 4640 psi (Max)]
Max torque:
143.3 Nm [105.61 lbf * ft]
The H1V PV pumps have been specially designed for pumping and metering polyurethane components with viscosity in the 1-2000 cSt range (polyoils and isocyanates). The high repeatability of the delivery and the accuracy of the metering make the H1V PV pump suitable for use on injection systems. The choice of the materials and seals is aimed at considerably increasing the pump’s life compared to other solutions currently used on these types of machines. The pump is designed in such a way that an external flushing circuit can be provided on the shaft seal, aimed at increasing its life; the flushing fluid doesn’t have a preferential direction, the direction shown in the user’s manual is purely an indication. The pump is not supplied with any hand wheel, which must be requested separately. The H1V PV pumps allow reaching higher casing pressures if compared with standard ones. All units are tested using ISO VG 46 mineral oil.
Displacement:
from 32 to 90 cm³/rev
from 1.95 to 5.49 in³/rev
Flow range:
from 100 to 220 l/min
[from 26.4 to 58.1 U.S. gpm]
Input speed:
up to 3600 rpm (Max)
Pressure range:
from 280 to 420 bar (Max)
[from 4060 to 6090 psi (Max)]
Max torque:
567 Nm [418 lbf * ft]
SH5V series are a family of variable displacement axial piston pumps designed for operation in open circuit. These axial piston swash plate design units can be used both for mobile and industrial applications. A strong and proven rotating group allows the pumps to work at high continuous and peak pressure. The pump features patented piston sliders design, resulting in minimal leaks and high volumetric efficiency. Controls provide high accuracy and repeatability. SH5V pumps operate at low noise emission levels, meeting the requirements of today's demanding industrial applications.
Displacement:
75/55, 130/100 cm³/rev
[4.57/3.35, 7.93/6.1 in³/rev]
Flow range:
from 220 to 365 l/min
[from 58 to 96 U.S. gpm]
Input speed:
Max.: up to 4300 rpm
Min.: 500 rpm
Pressure range:
from 400 to 480 bar (Max)
[from 5800 to 6960 psi (Max)]
Max torque:
980 Nm [722 lbf * ft]
SH6V series are variable displacement, axial piston pumps, with swash plate design, for closed circuit hydrostatic transmissions and high pressure applications. SH6V series are available in 75 and 130 cm3/rev [4.57 and 7.93 in3/rev] and with several control devices. The pump can be supplied as single or tandem version and with through drive options for the assembly of auxiliary gear pumps.
inviaci un e-mail
inviaci un fax al n. 
chiamaci al n. 
